Product Range
• Also Available but not Listed:
PM33-ТB250/300/350/400/450/500/550/600/650/700/750/800

Select a product from the dropdown below:

  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB010E-009S
Capacity
Capacity 10kVA / 8kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 91kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB010E-018S
Capacity
Capacity 10kVA / 8kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 91kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB010E-040G
Capacity
Capacity 10kVA / 8kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 91kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB010E-065S
Capacity
Capacity 10kVA / 8kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 91kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB010E-100G
Capacity
Capacity 10kVA / 8kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 91kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB015E-018S
Capacity
Capacity 15kVA / 12kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 112kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB015E-040G
Capacity
Capacity 15kVA / 12kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 112kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB015E-065S
Capacity
Capacity 15kVA / 12kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 112kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB015E-100G
Capacity
Capacity 15kVA / 12kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 112kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB020E-18S
Capacity
Capacity 20kVA / 16kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 120kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB020E-040G
Capacity
Capacity 20kVA / 16kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 120kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB020E-065S
Capacity
Capacity 20kVA / 16kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 120kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
Model
Model PM33-TB020E-100G
Capacity
Capacity 20kVA / 16kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >91%
Battery
Rated Battery Voltage 384VDC (348VDC Optional)
Battery Capacity / Backup Time Depends on external battery configuration
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <55dB @ 1 metre
Physical
Rack Dimensions 300 × 600 × 810mm
Weight 120kg
  • On-Line double conversion technology
  • Built-in galvanic isolation transformer
  • True sine-wave output with zero transfer time
  • High fault-current capacity for reliable downstream protection
  • Advanced circuit topology for enhanced stability and noise immunity
  • Scalable architecture with hot-expandable capacity
  • Parallel redundancy supporting up to six UPS units
  • Soft-start technology to minimise input inrush current
  • Compatible with standard generator systems
  • Large LCD display with advanced HMI software
  • Intelligent LiFePO4 battery management and charge control
  • Real-time battery State of Charge (SOC) and State of Health (SOH) monitoring
Model
Model PM33-TB040E-040G
Capacity
Capacity 40kVA / 32kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode ≥ 95%
Battery
Rated Battery Voltage 384VDC (348VDC or 360VDC Optional)
Battery Capacity / Backup Time External Battery – Time Depends on Battery Capacity
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Dimensions 400mm × 750mm × 1010mm
Weight 190kg
  • On-Line double conversion technology
  • Built-in galvanic isolation transformer
  • True sine-wave output with zero transfer time
  • High fault-current capacity for reliable downstream protection
  • Advanced circuit topology for enhanced stability and noise immunity
  • Scalable architecture with hot-expandable capacity
  • Parallel redundancy supporting up to six UPS units
  • Soft-start technology to minimise input inrush current
  • Compatible with standard generator systems
  • Large LCD display with advanced HMI software
  • Intelligent LiFePO4 battery management and charge control
  • Real-time battery State of Charge (SOC) and State of Health (SOH) monitoring
Model
Model PM33-TB040E-040G
Capacity
Capacity 40kVA / 32kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode ≥ 95%
Battery
Rated Battery Voltage 384VDC (348VDC or 360VDC Optional)
Battery Capacity / Backup Time External Battery – Time Depends on Battery Capacity
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Dimensions 400mm × 750mm × 1010mm
Weight 190kg
  • On-Line double conversion technology
  • Built-in galvanic isolation transformer
  • True sine-wave output with zero transfer time
  • High fault-current capacity for reliable downstream protection
  • Advanced circuit topology for enhanced stability and noise immunity
  • Scalable architecture with hot-expandable capacity
  • Parallel redundancy supporting up to six UPS units
  • Soft-start technology to minimise input inrush current
  • Compatible with standard generator systems
  • Large LCD display with advanced HMI software
  • Intelligent LiFePO4 battery management and charge control
  • Real-time battery State of Charge (SOC) and State of Health (SOH) monitoring
Model
Model PM33-TB040E-100G
Capacity
Capacity 40kVA / 32kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode ≥ 95%
Battery
Rated Battery Voltage 384VDC (348VDC or 360VDC Optional)
Battery Capacity / Backup Time External Battery – Time Depends on Battery Capacity
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Dimensions 400mm × 750mm × 1010mm
Weight 190kg
  • On-Line double conversion technology
  • Built-in galvanic isolation transformer
  • True sine-wave output with zero transfer time
  • High fault-current capacity for reliable downstream protection
  • Advanced circuit topology for enhanced stability and noise immunity
  • Scalable architecture with hot-expandable capacity
  • Parallel redundancy supporting up to six UPS units
  • Soft-start technology to minimise input inrush current
  • Compatible with standard generator systems
  • Large LCD display with advanced HMI software
  • Intelligent LiFePO4 battery management and charge control
  • Real-time battery State of Charge (SOC) and State of Health (SOH) monitoring
Model
Model PM33-TB060E-065S
Capacity
Capacity 60kVA / 48kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode ≥ 95%
Battery
Rated Battery Voltage 384VDC (348VDC or 360VDC Optional)
Battery Capacity / Backup Time External Battery – Time Depends on Battery Capacity
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Dimensions 400mm × 750mm × 1160mm
Weight 267kg
  • On-Line double conversion technology
  • Built-in galvanic isolation transformer
  • True sine-wave output with zero transfer time
  • High fault-current capacity for reliable downstream protection
  • Advanced circuit topology for enhanced stability and noise immunity
  • Scalable architecture with hot-expandable capacity
  • Parallel redundancy supporting up to six UPS units
  • Soft-start technology to minimise input inrush current
  • Compatible with standard generator systems
  • Large LCD display with advanced HMI software
  • Intelligent LiFePO4 battery management and charge control
  • Real-time battery State of Charge (SOC) and State of Health (SOH) monitoring
Model
Model PM33-TB060E-100G
Capacity
Capacity 60kVA / 48kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode ≥ 95%
Battery
Rated Battery Voltage 384VDC (348VDC or 360VDC Optional)
Battery Capacity / Backup Time External Battery – Time Depends on Battery Capacity
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Dimensions 400mm × 750mm × 1160mm
Weight 267kg

• On-Line double conversion technology
• Output isolation transformer for enhanced reliability and protection
• Industry-proven phase-controlled rectification technology
• Optimised circuit design for improved stability and interference resistance
• Online expandable architecture for increased load capacity
• Up to 6 UPS units can be directly paralleled
• LBS synchronisation for independent UPS systems
• Generator compatible
• Soft-start function reduces startup inrush current
• Large LCD display with LED status indicators
• Advanced lithium battery management with temperature compensation
• Real-time battery State of Charge (SOC) and State of Health (SOH) monitoring

Model
Model PM33-TB010E
Capacity
Capacity 80kVA / 64kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.96
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >95%
Battery
Rated Battery Voltage 384VDC (348VDC Optimal)
Battery Capacity / Backup Time External Battery Depends
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Rack Dimension 4550 × 830 × 1160
Weight 310kg

• On-Line double conversion technology
• Output isolation transformer for enhanced reliability and protection
• Industry-proven phase-controlled rectification technology
• Optimised circuit design for improved stability and interference resistance
• Online expandable architecture for increased load capacity
• Up to 6 UPS units can be directly paralleled
• LBS synchronisation for independent UPS systems
• Generator compatible
• Soft-start function reduces startup inrush current
• Large LCD display with LED status indicators
• Advanced lithium battery management with temperature compensation
• Real-time battery State of Charge (SOC) and State of Health (SOH) monitoring

Model
Model PM33-TB010E
Capacity
Capacity 80kVA / 64kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.96
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >95%
Battery
Rated Battery Voltage 384VDC (348VDC Optimal)
Battery Capacity / Backup Time External Battery Depends
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Rack Dimension 4550 × 830 × 1160
Weight 310kg
  • On-Line double conversion technology
  • Output isolation transformer for enhanced reliability and protection
  • Industry-proven phase-controlled rectification technology
  • Robust industrial cabinet design for demanding environments
  • Optimised circuit design with enhanced anti-interference capability
  • Online expandable architecture for increased load capacity
  • Up to 6 UPS units can be directly paralleled
  • LBS synchronisation for independent UPS systems
  • Compatible with generator operation
  • Soft-start function reduces startup inrush current
  • Large LCD display with comprehensive monitoring and alarms
  • Advanced lithium battery management with SOC and SOH monitoring
Model
Model PM33-TB100E-065S
Capacity
Capacity 100kVA / 80kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.96
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >95%
Battery
Rated Battery Voltage 384VDC (348VDC Optimal)
Battery Capacity / Backup Time External Battery Depends
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Rack Dimension 700 × 800 × 1500
Weight 460kg
  • On-Line double conversion technology
  • Output isolation transformer for enhanced reliability and protection
  • Industry-proven phase-controlled rectification technology
  • Robust industrial cabinet design for demanding environments
  • Optimised circuit design with enhanced anti-interference capability
  • Online expandable architecture for increased load capacity
  • Up to 6 UPS units can be directly paralleled
  • LBS synchronisation for independent UPS systems
  • Compatible with generator operation
  • Soft-start function reduces startup inrush current
  • Large LCD display with comprehensive monitoring and alarms
  • Advanced lithium battery management with SOC and SOH monitoring
Model
Model PM33-TB100E-100G
Capacity
Capacity 100kVA / 80kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.96
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >95%
Battery
Rated Battery Voltage 384VDC (348VDC Optimal)
Battery Capacity / Backup Time External Battery Depends
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Rack Dimension 700 × 800 × 1500
Weight 460kg
  • On-Line double conversion technology
  • Output isolation transformer for enhanced reliability and protection
  • Industry-proven phase-controlled rectification technology
  • Robust cabinet construction for demanding industrial environments
  • Optimised circuit design with enhanced anti-interference capability
  • Online expandable architecture for increased load capacity
  • Up to 6 UPS units can be directly paralleled
  • LBS synchronisation for independent UPS systems
  • Compatible with generator operation
  • Soft-start function reduces startup inrush current
  • Large LCD display with LED status indicators and comprehensive alarms
  • Advanced lithium battery management with SOC and SOH monitoring
Model
Model PM33-TB120E-065S
Capacity
Capacity 120kVA / 96kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.96
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >95%
Battery
Rated Battery Voltage 384VDC (348VDC Optimal)
Battery Capacity / Backup Time External Battery Depends
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Rack Dimension 700 × 800 × 1500
Weight 550kg
  • On-Line double conversion technology
  • Output isolation transformer for enhanced reliability and protection
  • Industry-proven phase-controlled rectification technology
  • Robust cabinet construction for demanding industrial environments
  • Optimised circuit design with enhanced anti-interference capability
  • Online expandable architecture for increased load capacity
  • Up to 6 UPS units can be directly paralleled
  • LBS synchronisation for independent UPS systems
  • Compatible with generator operation
  • Soft-start function reduces startup inrush current
  • Large LCD display with LED status indicators and comprehensive alarms
  • Advanced lithium battery management with SOC and SOH monitoring
Model
Model PM33-TB020E-100G
Capacity
Capacity 120kVA / 96kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.96
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >95%
Battery
Rated Battery Voltage 384VDC (348VDC Optimal)
Battery Capacity / Backup Time External Battery Depends
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Rack Dimension 700 × 800 × 1500
Weight 550kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology
  • Robust design suited to harsh industrial environments
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and protection functions
Model
Model PM33-TB160E-100G
Capacity
Capacity 160kVA / 128kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >92%
Battery
Rated Battery Voltage 384VDC (348VDC Optimal)
Battery Capacity / Backup Time External Battery – Time Depends on Battery Capacity
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Rack Dimensions 700 × 800 × 1700mm
Weight 630kg

• On-Line double conversion technology
• Built-in isolation transformer for enhanced reliability and protection
• Three-phase input and three-phase output
• Industry-proven phase-controlled rectification technology
• Robust industrial design for demanding environments
• Optimised circuit design with enhanced anti-interference capability
• Online expandable architecture for increased load capacity
• Up to 6 UPS units can be directly paralleled
• LBS synchronisation for independent UPS systems
• Compatible with generator operation
• Soft-start function reduces startup inrush current
• Advanced LiFePO4 battery management with SOC and SOH monitoring

Model
Model PM33-TB200E-100G
Capacity
Capacity 200kVA / 160kW
Phase Three Phase Input / Three Phase Output
Mains Input
Wiring L1/L2/L3/N+PE
Rated Voltage 380/400/415Vac (L-L)
Voltage Range +25%
Frequency Range 45Hz–65Hz
Input Power Factor ≥ 0.95
AC Output
Wiring L1/L2/L3/N+PE
Output Voltage 380/400/415Vac
Voltage Regulation +1%
Output Frequency Automatic bypass frequency tracking
Waveform Sine Wave
Distortion (THDV%) < 1% Linear Load
< 5% Non-Linear Load
Overload Capability 105%–110% Rated Load: 60 min
110%–125% Rated Load: 10 min
125%–150% Rated Load: 1 min
150% Rated Load: 10 sec
Mains Mode >92%
Battery
Rated Battery Voltage 384VDC (348VDC Optimal)
Battery Capacity / Backup Time External Battery – Time Depends on Battery Capacity
HMI
Display LCD Display with LED Indicator
Display Information Input/Output Voltage, Frequency, Load Level, Operation Mode, Health Status
Communication Port RS232 Port
Network Card: Supports SNMP and TCP/IP protocols for remote UPS monitoring via smartphone app, web page or PC monitoring software. Supports Server / NAS shutdown.
BMS Port Modbus
Control BMS (Battery Management System) charge and discharge dry contact
Alarm Function Mains power abnormality, UPS failure, battery under-voltage, output overload, etc.
Protection Function Battery under-voltage protection, overload protection, short-circuit protection, over-temperature protection and input over/under-voltage protection.
Operating Environment
Temperature Range -10°C to 40°C
Relative Humidity 0–95% (Non-condensing)
Acoustic Noise <60dB @ 1 metre
Physical
Rack Dimension 700 × 800 × 1700
Weight 630kg
  • Output isolation transformer for enhanced reliability and protection
  • Proven phase-controlled rectification technology for harsh industrial environments
  • Robust cabinet design suited to demanding operating conditions
  • Optimised circuitry with strong anti-interference capability
  • Online expandable design for increased system capacity
  • Supports parallel operation of up to 6 UPS units
  • LBS synchronisation for two independent UPS systems
  • Generator compatible with soft-start functionality
  • Advanced lithium battery management with temperature compensation
  • Intelligent charging and discharging control for extended battery life
  • Accurate battery SOC and SOH monitoring
  • Large LCD display with LED indicators, alarms and system protection functions
CONTACT AN EXPERT Download Brochure

Product Features

On-Line, double conversion technology

The incoming mains supply is converted to DC, which is used to charge the batteries and, via the inverter, is converted back
to a clean AC output. This provides the connected equipment with the best possible power protection removing any spikes, surges or dips in voltage resulting in improved performance and reliability.

Transformer-less

This technology has been tried and tested and has proven itself to be exceptionally reliable. The use of high frequency technology dramatically reduces the size of the equipment and improves efficiency which in turn reduces the running cost.

USB and SNMP communication

The USB port allows the UPS to connect to a computer system for real time monitoring of the UPS. The user can set UPS parameters
such as charge rate, battery low voltage, and output voltages.
SNMP (Optional extra) allows the UPS to communicate via a network, and in conjunction with various software packages,
can supply information on the status of the UPS and perform a shut down if required.

Lithium Iron Battery
Technology (LiFePo4)

The Lithium-Iron Phosphate battery is regarded as the safest technology in batteries for multiple cycle applications. Each battery unit has a build in fire protection module for additional safety.

The LiFePo4 battery offers users a compact solution that is smaller and weighs less than the equivalent Lead Acid based designs. The battery is designed for 10 years life or 6000 cycles.

Generator compatible(LiFePo4)

The output power from the generator can vary as different loads come on and go off. The UPS will ensure that your equipment
is not damaged by the voltage fluctuations from the generator
.

Battery Management Unit (BMU)

The battery pack is constructed from 4 x 48VDC LiFePo4 battery packs connected in series providing the UPS with a 192VDC
battery pack. Each battery pack has an internal battery management unit (BMU), which in turn is controlled by a central Rack Battery Management Unit (RBMU) that communicates between the battery packs and the UPS.

The entire battery pack is controlled down to each cell, ensuring an even sharing of charge and discharge across the cells, resulting in maximum protection and reliability for the system.

Recharge

The UPS is equipped with a 10A charger (2,2KW) on the smaller machine, and an additional 5KW battery charger on the units
with larger battery packs, that will recover the battery to 80% within 4 to 5 hours.

DC start capability

Units are able to start and run with no mains input. Essentially the units can be run as a straight forward inverter if necessary.

LCD Display (UPS)

Gives users accurate information on the input and output voltages on the UPS, as well as frequency, load levels and available battery capacity. Audible alarm can be reset from the LCD display.

3-Step invertor design

The unique 3-step inverter design protects the inverter against sudden inrush current demands from the load, thereby improving
product reliability and uptime.