Product Range Select a product from the dropdown below:
  • State of the art microprocessor controlled main PCB, limits component count and improves reliability
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily prolonging battery life
  • LED Display to easily determine the UPS status
  • Automatic self test on power up to ensure the UPS is working correctly
  • Cold start facility so that the unit can be powered up even when mains power is not available
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down
  • Intelligent battery management: battery temperature compensation to extend the battery life
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Optional RS232 / USB communication port and RJ11 / RJ45 protection
Model PM265
Capacity 650VA/390W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Inverter Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Stepped Sine Wave
Output Battery
Battery Size 1 x 12V7Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load || Max Load: 1.6 Amps
25%  30 m    
50%  15 m    
75%  8 m
General
Size 290mm x 100mm x 140mm
Weight 4.5 kgs
Software Optional Extra
SNMP No
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 3 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • High Frequency, transformerless design results in a small compact unit to suit an office or server room environment
  • On-Line double conversion technology
  • True sine wave output with less than 3% THD
  • Zero transfer time
  • Advanced battery management (ABM)
  • Batteries automatically charge when inverter is off
  • UPS will start without mains present (cold start)
  • Self diagnosis on UPS start up
  • Lightning and surge protection built in
  • USB Management Software (SNMP Optional)
  • LCD Display
  • Compatible with most brands of generator
Model PM265-HR
Capacity 650VA/390W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Inverter Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Stepped Sine Wave
Output Battery
Battery Size 1 x 12V7Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load || Max Load: 1.6 Amps
25%  30 m    
50%  15 m    
75%  8 m
General
Size 290mm x 100mm x 140mm
Weight 4.5 kgs
Software Optional Extra
SNMP No
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 3 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • State of the art microprocessor controlled main PCB, limits component count and improves reliability
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily prolonging battery life
  • LED Display to easily determine the UPS status
  • Automatic self test on power up to ensure the UPS is working correctly
  • Cold start facility so that the unit can be powered up even when mains power is not available
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down
  • Intelligent battery management: battery temperature compensation to extend the battery life
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Optional RS232 / USB communication port and RJ11 / RJ45 protection
Model PM2120
Capacity 1200VA/720W
Input
Voltage Range 175VAC to 280VAC
Frequency Range 50HZ ± 10%
Inverter Output
Voltage Range 175VAC to 280VAC
Frequency Range 50HZ ± 10%
Waveform Stepped Sine Wave
Output Battery
Battery Size 2 x 12V9Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load || Max Load: 3.1 Amps
25%  20 mins    
50%  10 mins    
75%  5 mins
General
Size 136mm x 328mm x 186mm
Weight 9 kgs
Software Optional Extra
SNMP No
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 3 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • State of the art microprocessor controlled main PCB, limits component count and improves reliability
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily prolonging battery life
  • LED Display to easily determine the UPS status
  • Automatic self test on power up to ensure the UPS is working correctly
  • Cold start facility so that the unit can be powered up even when mains power is not available
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down
  • Intelligent battery management: battery temperature compensation to extend the battery life
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Optional RS232 / USB communication port and RJ11 / RJ45 protection
Model PM2120HR
Capacity 1200VA/720W
Input
Voltage Range 175VAC to 280VAC
Frequency Range 50HZ ± 10%
Inverter Output
Voltage Range 175VAC to 280VAC
Frequency Range 50HZ ± 10%
Waveform Stepped Sine Wave
Output Battery
Battery Size 2 x 12V9Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load || Max Load: 3.1 Amps
25%  20 mins    50%  10 mins    75%  5 mins
General
Size 136mm x 328mm x 186mm
Weight 9 kgs
Software Optional Extra
SNMP No
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 3 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • State of the art microprocessor controlled main PCB, limits component count and improves reliability
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily prolonging battery life
  • LED Display to easily determine the UPS status
  • Automatic self test on power up to ensure the UPS is working correctly
  • Cold start facility so that the unit can be powered up even when mains power is not available
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down
  • Intelligent battery management: battery temperature compensation to extend the battery life
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Optional RS232 / USB communication port and RJ11 / RJ45 protection
Model
Model PM2200
Capacity
Capacity 2000VA/1200W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Inverter Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Stepped Sine Wave
Output Battery
Battery Size 2 x 12V9Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 5.4 Amps
25% Load: 16 mins
50% Load: 8 mins
75% Load: 4 mins
General
Size 144mm x 410mm x 215mm
Weight 18.5 kgs
Software USB Management Software
SNMP No
Warranty
Unit Units carry a 12-month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 3 months warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.

x

x

x

x

x

x

  • Microprocessor-based digital control
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
  • Pure sine wave output on inverter
  • Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
  • LCD Display with full system information
  • Input Voltage
  • Output Voltage
  • Frequency
  • Battery Voltage and Capacity
  • Load Level
  • Automatic self test on power up
  • Cold start facility
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down.
  • Intelligent battery management: battery temperature compensation to extend the battery life;
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Automatic shut down on no load (Optional setting)
  • RS232 / USB communication port and RJ11 / RJ45 protection, includes
  • Unattended safety shut down
  • System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.
  • State of the art microprocessor controlled main PCB, limits component count and improves reliability
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily prolonging battery life
  • LED Display to easily determine the UPS status
  • Automatic self test on power up to ensure the UPS is working correctly
  • Cold start facility so that the unit can be powered up even when mains power is not available
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down
  • Intelligent battery management: battery temperature compensation to extend the battery life
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Optional RS232 / USB communication port and RJ11 / RJ45 protection
Model
Model PM2100S
Capacity
Capacity 1200VA/720W
Input
Voltage Range 175VAC to 280VAC
Frequency Range 50HZ ± 10%
Inverter Output
Voltage Range 175VAC to 280VAC
Frequency Range 50HZ ± 10%
Waveform Stepped Sine Wave
Output Battery
Battery Size 2 x 12V9Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 3.1 Amps
25% Load: 20 mins
50% Load: 10 mins
75% Load: 5 mins
General
Size 136mm x 328mm x 186mm
Weight 9 kgs
Software Optional Extra
SNMP No
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 3 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • State of the art microprocessor controlled main PCB, limits component count and improves reliability
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily prolonging battery life
  • LED Display to easily determine the UPS status
  • Automatic self test on power up to ensure the UPS is working correctly
  • Cold start facility so that the unit can be powered up even when mains power is not available
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down
  • Intelligent battery management: battery temperature compensation to extend the battery life
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Optional RS232 / USB communication port and RJ11 / RJ45 protection
Model
Model PM2200S
Capacity
Capacity 2000VA/1200W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Inverter Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Stepped Sine Wave
Output Battery
Battery Size 2 x 12V9Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 5.4 Amps
25% Load: 16 mins
50% Load: 8 mins
75% Load: 4 mins
General
Size 144mm x 410mm x 215mm
Weight 18.5 kgs
Software USB Management Software
SNMP No
Warranty
Unit Units carry a 12-month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 3 months warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.

x

x

  • Microprocessor-based digital control
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
  • Pure sine wave output on inverter
  • Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
  • LCD Display with full system information
  • Input Voltage
  • Output Voltage
  • Frequency
  • Battery Voltage and Capacity
  • Load Level
  • Automatic self test on power up
  • Cold start facility
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down.
  • Intelligent battery management: battery temperature compensation to extend the battery life;
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Automatic shut down on no load (Optional setting)
  • RS232 / USB communication port and RJ11 / RJ45 protection, includes
  • Unattended safety shut down
  • System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.
Model
Model PM2100E
Capacity
Capacity 1000VA/800W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Sine Wave
Output Battery
Battery Size 2 x 12V40Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 3.4 Amps
25% Load: 2.5 Hours
50% Load: 1 Hour
75% Load: 35 m
General
Size 360mm x 145mm x 215mm
Weight 9 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 390mm x 260mm x 235mm
Weight 31 kgs
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 6 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • Microprocessor-based digital control
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
  • Pure sine wave output on inverter
  • Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
  • LCD Display with full system information
  • Input Voltage
  • Output Voltage
  • Frequency
  • Battery Voltage and Capacity
  • Load Level
  • Automatic self test on power up
  • Cold start facility
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down.
  • Intelligent battery management: battery temperature compensation to extend the battery life;
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Automatic shut down on no load (Optional setting)
  • RS232 / USB communication port and RJ11 / RJ45 protection, includes
  • Unattended safety shut down
  • System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.
Model
Model PM2100E-040G
Capacity
Capacity 1000VA/800W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Sine Wave
Output Battery
Battery Size 2 x 12V40Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 3.4 Amps
25% Load: 2.5 Hours
50% Load: 1 Hour
75% Load: 35 m
General
Size 360mm x 145mm x 215mm
Weight 9 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 390mm x 260mm x 235mm
Weight 31 kgs
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 6 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • Microprocessor-based digital control
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
  • Pure sine wave output on inverter
  • Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
  • LCD Display with full system information
  • Input Voltage
  • Output Voltage
  • Frequency
  • Battery Voltage and Capacity
  • Load Level
  • Automatic self test on power up
  • Cold start facility
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down.
  • Intelligent battery management: battery temperature compensation to extend the battery life;
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Automatic shut down on no load (Optional setting)
  • RS232 / USB communication port and RJ11 / RJ45 protection, includes
  • Unattended safety shut down
  • System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.
Model
Model PM2100E-100G
Capacity
Capacity 1000VA/800W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Sine Wave
Output Battery
Battery Size 2 x 12V100Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 3.4 Amps
25% Load: 8 Hours
50% Load: 4 Hours
75% Load: 2 Hours
General
Size 360mm x 145mm x 215mm
Weight 9 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 400mm x 345mm x 350mm
Weight 65 kgs
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 6 months warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • Online double conversion technology to recreate a clean output at all times.
  • Recharge – The UPS is equipped with an advanced battery charger that will recover the battery from 80% discharge to fully charged within 4 to 5 hours.
  • LCD on the UPS – Gives users accurate information on the input and output voltages on the UPS frequency as well.
  • LCD on the Display Battery Management Unit (BMU) – Gives accurate information on the status of each cell within each battery pack, cell voltage, temperature and state of charge.
  • DC start capability – Units are able to start and run with no mains input.
  • USB and SNMP as standard Communication ports – Allows the UPS to connect to the computer system or network, and in conjunction with various software packages, can supply information on the status of the UPS and perform shut down.
  • Generator compatible input – The output power from the generator can vary as different loads come on and go off, the UPS will ensure that your equipment is not be damaged by the voltage fluctuations from the generator.
Model
Model PM2100E-050L-FM
Capacity
Capacity 1000VA/800W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50Hz ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50Hz ± 10%
Waveform Sine Wave
Output Battery
Battery Size 1 x 24V50Ah LFP
Recharge Time 100% Capacity after 3.5 hours
Backup Time @ % Load Max Load: 3.4 Amps
25% Load: 4.8 hrs
50% Load: 2.4 hrs
75% Load: 1.6 hrs
General
Size 144mm x 345mm x 215mm
Weight 12.5 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 225mm x 390mm x 300mm
Weight 12.5 kgs
Warranty
Unit Units carry a 24 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries 5 Years or 3000 Cycles @ 80% depth of discharge (DOD)
  • Microprocessor-based digital control
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
  • Pure sine wave output on inverter
  • Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
  • LCD Display with full system information
  • Input Voltage
  • Output Voltage
  • Frequency
  • Battery Voltage and Capacity
  • Load Level
  • Automatic self test on power up
  • Cold start facility
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down.
  • Intelligent battery management: battery temperature compensation to extend the battery life;
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Automatic shut down on no load (Optional setting)
  • RS232 / USB communication port and RJ11 / RJ45 protection, includes
  • Unattended safety shut down
  • System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.
Model
Model PM2200E
Capacity
Capacity 2000VA/1600W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Sine Wave
Output Battery
Battery Size 4 x 12V40Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 7.0 Amp
25% Load: 2.5 Hours
50% Load: 1 Hour
75% Load: 35 m
General
Size 144mm x 410mm x 215mm
Weight 18.5 kgs
Software USB Management Software
SNMP
Battery Box
Size 500mm x 380mm x 320mm
Weight 36 kgs
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 6 months warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • Microprocessor-based digital control
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
  • Pure sine wave output on inverter
  • Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
  • LCD Display with full system information
  • Input Voltage
  • Output Voltage
  • Frequency
  • Battery Voltage and Capacity
  • Load Level
  • Automatic self test on power up
  • Cold start facility
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down.
  • Intelligent battery management: battery temperature compensation to extend the battery life;
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Automatic shut down on no load (Optional setting)
  • RS232 / USB communication port and RJ11 / RJ45 protection, includes
  • Unattended safety shut down
  • System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.
Model
Model PM2200E-040G
Capacity
Capacity 2000VA/1600W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Sine Wave
Output Battery
Battery Size 4 x 12V40Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 7.0 Amp
25% Load: 2.5 Hours
50% Load: 1 Hour
75% Load: 35 m
General
Size 144mm x 410mm x 215mm
Weight 18.5 kgs
Software USB Management Software
SNMP
Battery Box
Size 500mm x 380mm x 320mm
Weight 36 kgs
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 6 months warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • Microprocessor-based digital control
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
  • Pure sine wave output on inverter
  • Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
  • LCD Display with full system information
  • Input Voltage
  • Output Voltage
  • Frequency
  • Battery Voltage and Capacity
  • Load Level
  • Automatic self test on power up
  • Cold start facility
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down.
  • Intelligent battery management: battery temperature compensation to extend the battery life;
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Automatic shut down on no load (Optional setting)
  • RS232 / USB communication port and RJ11 / RJ45 protection, includes
  • Unattended safety shut down
  • System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.
Model
Model PM2200E-100G
Capacity
Capacity 2000VA/1600W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Sine Wave
Output Battery
Battery Size 4 x 12V100Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 7.0 Amps
25% Load: 8 Hours
50% Load: 4 Hours
75% Load: 2 Hours
General
Size 144mm x 410mm x 215mm
Weight 18.5 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 500mm x 365mm x 610mm
Weight 135 kgs
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 6 months warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • Online double conversion technology to recreate a clean output at all times.
  • Recharge – The UPS is equipped with an advanced battery charger that will recover the battery from 80% discharge to fully charged within 4 to 5 hours.
  • LCD on the UPS – Gives users accurate information on the input and output voltages on the UPS frequency as well.
  • LCD on the Display Battery Management Unit (BMU) – Gives accurate information on the status of each cell within each battery pack, cell voltage, temperature and state of charge.
  • DC start capability – Units are able to start and run with no mains input.
  • USB and SNMP as standard Communication ports – Allows the UPS to connect to the computer system or network, and in conjunction with various software packages, can supply information on the status of the UPS and perform shut down.
  • Generator compatible input – The output power from the generator can vary as different loads come on and go off, the UPS will ensure that your equipment is not be damaged by the voltage fluctuations from the generator.
Model
Model PM2200E-050L-FM
Capacity
Capacity 2000VA/1600W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50Hz ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50Hz ± 10%
Waveform Sine Wave
Output Battery
Battery Size 1 x 48V50Ah LFP
Recharge Time 100% Capacity after 3.5 hours
Backup Time @ % Load Max Load: 7.0 Amps
25% Load: 4.8 hrs
50% Load: 2.4 hrs
75% Load: 1.6 hrs
General
Size 190mm x 467mm x 336mm
Weight 28 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 442mm x 480mm x 135mm
Weight 29 kgs
Warranty
Unit Units carry a 24 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries 5 Years or 3000 Cycles @ 80% depth of discharge (DOD)
  • Online double conversion technology to recreate a clean output at all times.
  • Recharge – The UPS is equipped with an advanced battery charger that will recover the battery from 80% discharge to fully charged within 4 to 5 hours.
  • LCD on the UPS – Gives users accurate information on the input and output voltages on the UPS frequency as well.
  • LCD on the Display Battery Management Unit (BMU) – Gives accurate information on the status of each cell within each battery pack, cell voltage, temperature and state of charge.
  • DC start capability – Units are able to start and run with no mains input.
  • USB and SNMP as standard Communication ports – Allows the UPS to connect to the computer system or network, and in conjunction with various software packages, can supply information on the status of the UPS and perform shut down.
  • Generator compatible input – The output power from the generator can vary as different loads come on and go off, the UPS will ensure that your equipment is not be damaged by the voltage fluctuations from the generator.
Model
Model PM2200E-100LFP
Capacity
Capacity 2000VA/1600W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50Hz ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50Hz ± 10%
Waveform Sine Wave
Output Battery
Battery Size 2 x 48V100Ah LFP
Recharge Time 100% Capacity after 5 hours
Backup Time @ % Load Max Load: 7.0 Amps
25% Load: 9.6 hrs
50% Load: 4.8 hrs
75% Load: 3.2 hrs
General
Size 190mm x 467mm x 336mm
Weight 28 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 442mm x 420mm x 135mm
Weight 37 kgs
Warranty
Unit Units carry a 24 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries 5 Years or 3000 Cycles @ 80% depth of discharge (DOD)
  • Microprocessor-based digital control
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
  • Pure sine wave output on inverter
  • Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
  • LCD Display with full system information
  • Input Voltage
  • Output Voltage
  • Frequency
  • Battery Voltage and Capacity
  • Load Level
  • Automatic self test on power up
  • Cold start facility
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down.
  • Intelligent battery management: battery temperature compensation to extend the battery life;
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Automatic shut down on no load (Optional setting)
  • RS232 / USB communication port and RJ11 / RJ45 protection, includes
  • Unattended safety shut down
  • System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.
Model
Model PM2300S
Capacity
Capacity 3000VA/1800W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50HZ ± 10%
Waveform Sine Wave
Output Battery
Battery Size 4 x 12V9AH
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 8.2 Amps
25% Load: 16 mins
50% Load: 8 mins
75% Load: 4 mins
General
Size 190mm x 467mm x 336mm
Weight 28 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size Internal Batteries
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 3 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • Microprocessor-based digital control
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
  • Pure sine wave output on inverter
  • Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
  • LCD Display with full system information
  • Input Voltage
  • Output Voltage
  • Frequency
  • Battery Voltage and Capacity
  • Load Level
  • Automatic self test on power up
  • Cold start facility
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down.
  • Intelligent battery management: battery temperature compensation to extend the battery life;
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Automatic shut down on no load (Optional setting)
  • RS232 / USB communication port and RJ11 / RJ45 protection, includes
  • Unattended safety shut down
  • System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.
Model
Model PM2300E-040S
Capacity
Capacity 3000VA/2400W
Input
Voltage Range 220 VAC +- 25%
Frequency Range 50HZ +- 10%
Output
Voltage Range 220 VAC +- 25%
Frequency Range 50HZ +- 10%
Waveform Sine Wave
Output Battery
Battery Size 4 x 12V40Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 10.4 Amps
25% Load: 5 hrs
50% Load: 40 mins
75% Load: 22 mins
General
Size 190mm x 467mm x 336mm
Weight 28 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 580mm x 345mm x 300mm
Weight 135 kgs
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 6 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • Microprocessor-based digital control
  • Wide input voltage range with two Step Automatic Voltage Regulator (AVR), saves the UPS from switching to battery power unnecessarily
  • Pure sine wave output on inverter
  • Auto tracking of mains phase to ensure inverter output voltage is the same phase as mains input, reducing transfer time and peak surge on switch over
  • LCD Display with full system information
  • Input Voltage
  • Output Voltage
  • Frequency
  • Battery Voltage and Capacity
  • Load Level
  • Automatic self test on power up
  • Cold start facility
  • Automatic shut down on low battery to protect the battery and insure maximum life
  • Auto restart when mains power is restored after automatic shut down.
  • Intelligent battery management: battery temperature compensation to extend the battery life;
  • Three-stage charging to shorten recharge time (6 to 8 hours)
  • Automatic charging in OFF mode
  • Battery overcharge & over discharge protection
  • Short circuit, overload, surge protections built in
  • Automatic shut down on no load (Optional setting)
  • RS232 / USB communication port and RJ11 / RJ45 protection, includes
  • Unattended safety shut down
  • System alarm and auto Power-On / Off by RS232 or USB interface communicating with PC.
Model
Model PM2300E-100S
Capacity
Capacity 3000VA/2400W
Input
Voltage Range 220 V AC – 25%
Frequency Range 50HZ +- 10%
Output
Voltage Range 220 V AC – 25%
Frequency Range 50HZ +- 10%
Waveform Sine Wave
Output Battery
Battery Size 4 x 12V100Ah
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 10.4 Amps
25% Load: 5 hrs
50% Load: 2 hrs
75% Load: 85 mins
General
Size 190mm x 467mm x 336mm
Weight 28 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 500mm x 365mm x 610mm
Weight 135 kgs
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries The batteries carry a 6 month warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
  • Online double conversion technology to recreate a clean output at all times.
  • Recharge – The UPS is equipped with an advanced battery charger that will recover the battery from 80% discharge to fully charged within 4 to 5 hours.
  • LCD on the UPS – Gives users accurate information on the input and output voltages on the UPS frequency as well.
  • LCD on the Display Battery Management Unit (BMU) – Gives accurate information on the status of each cell within each battery pack, cell voltage, temperature and state of charge.
  • DC start capability – Units are able to start and run with no mains input.
  • USB and SNMP as standard Communication ports – Allows the UPS to connect to the computer system or network, and in conjunction with various software packages, can supply information on the status of the UPS and perform shut down.
  • Generator compatible input – The output power from the generator can vary as different loads come on and go off, the UPS will ensure that your equipment is not be damaged by the voltage fluctuations from the generator.
Model
Model PM2300E-050LFP
Capacity
Capacity 3000VA/2400W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50Hz ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50Hz ± 10%
Waveform Sine Wave
Output Battery
Battery Size 1 x 48V50Ah LFP
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 10.4 Amps
25% Load: 5 Hours
50% Load: 2 Hours
75% Load: 1,25 Hours
General
Size 442mm x 420mm x 135mm
Weight 45 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 190mm x 467mm x 336mm
Weight 28 kgs
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries 5 Years or 3000 Cycles @ 80% depth of discharge (DOD)
  • Online double conversion technology to recreate a clean output at all times.
  • Recharge – The UPS is equipped with an advanced battery charger that will recover the battery from 80% discharge to fully charged within 4 to 5 hours.
  • LCD on the UPS – Gives users accurate information on the input and output voltages on the UPS frequency as well.
  • LCD on the Display Battery Management Unit (BMU) – Gives accurate information on the status of each cell within each battery pack, cell voltage, temperature and state of charge.
  • DC start capability – Units are able to start and run with no mains input.
  • USB and SNMP as standard Communication ports – Allows the UPS to connect to the computer system or network, and in conjunction with various software packages, can supply information on the status of the UPS and perform shut down.
  • Generator compatible input – The output power from the generator can vary as different loads come on and go off, the UPS will ensure that your equipment is not be damaged by the voltage fluctuations from the generator.
Model
Model PM2300E-100L-RM
Capacity
Capacity 3000VA/2400W
Input
Voltage Range 230V AC ± 25%
Frequency Range 50Hz ± 10%
Output
Voltage Range 230V AC ± 25%
Frequency Range 50Hz ± 10%
Waveform Sine Wave
Output Battery
Battery Size 1 x 48V100Ah LFP
Recharge Time 90% Capacity after 8 hours
Backup Time @ % Load Max Load: 10.4 Amps
25% Load: 8hrs
50% Load: 4hrs
75% Load: 2.6hrs
General
Size 190mm x 467mm x 336mm
Weight 28 kgs
Software USB Management Software
SNMP SNMP card optional extra
Battery Box
Size 442mm x 420mm x 135mm
Weight 45 kgs
Warranty
Unit Units carry a 24 month carry-in warranty and are sold subject to PowerMan standard terms and conditions, a copy of which is available on request.
Batteries 5 Years or 3000 Cycles @ 80% depth of discharge (DOD)
CONTACT AN EXPERT Download Brochure

Product Features

On-Line, double conversion technology

The incoming mains supply is converted to DC, which is used to charge the batteries and, via the inverter, is converted back
to a clean AC output. This provides the connected equipment with the best possible power protection removing any spikes, surges or dips in voltage resulting in improved performance and reliability.

Transformer-less

This technology has been tried and tested and has proven itself to be exceptionally reliable. The use of high frequency technology dramatically reduces the size of the equipment and improves efficiency which in turn reduces the running cost.

USB and SNMP communication

The USB port allows the UPS to connect to a computer system for real time monitoring of the UPS. The user can set UPS parameters
such as charge rate, battery low voltage, and output voltages.
SNMP (Optional extra) allows the UPS to communicate via a network, and in conjunction with various software packages,
can supply information on the status of the UPS and perform a shut down if required.

Lithium Iron Battery
Technology (LiFePo4)

The Lithium-Iron Phosphate battery is regarded as the safest technology in batteries for multiple cycle applications. Each battery unit has a build in fire protection module for additional safety.

The LiFePo4 battery offers users a compact solution that is smaller and weighs less than the equivalent Lead Acid based designs. The battery is designed for 10 years life or 6000 cycles.

Generator compatible(LiFePo4)

The output power from the generator can vary as different loads come on and go off. The UPS will ensure that your equipment
is not damaged by the voltage fluctuations from the generator
.

Battery Management Unit (BMU)

The battery pack is constructed from 4 x 48VDC LiFePo4 battery packs connected in series providing the UPS with a 192VDC
battery pack. Each battery pack has an internal battery management unit (BMU), which in turn is controlled by a central Rack Battery Management Unit (RBMU) that communicates between the battery packs and the UPS.

The entire battery pack is controlled down to each cell, ensuring an even sharing of charge and discharge across the cells, resulting in maximum protection and reliability for the system.

Recharge

The UPS is equipped with a 10A charger (2,2KW) on the smaller machine, and an additional 5KW battery charger on the units
with larger battery packs, that will recover the battery to 80% within 4 to 5 hours.

DC start capability

Units are able to start and run with no mains input. Essentially the units can be run as a straight forward inverter if necessary.

LCD Display (UPS)

Gives users accurate information on the input and output voltages on the UPS, as well as frequency, load levels and available battery capacity. Audible alarm can be reset from the LCD display.

3-Step invertor design

The unique 3-step inverter design protects the inverter against sudden inrush current demands from the load, thereby improving
product reliability and uptime.